QU50338 Replacement NP205 Shift Fork is a low cost alternative for stock, non-synchronized New Process NP205 gear drive Transfer Cases in Chevy, Dodge, Ford, GMC and International full size 4x4 trucks. Imported.
Also See TK10666 New Process Original Equipment Shift Fork
Dan the Gear Man® Tech Note 1:
The two high wear items on NP205 Transfer Cases are the Shift Forks and Sliding Clutch Collar Rings. Any significant wear on either part can cause your transfer case to "jump" out of gear under load. On the Fork tips, If you can feel a ridge with your fingernail, the fork should be replaced to prevent future problems.
Dan the Gear Man® Tech Note 2:
Will not replace QU30085 special fork used for the front output shaft in 1982-1986 GM synchronized NP205 cases.
Dan the Gear Man® Tech Note 4:
Need Tech Help on rebuilding your NP205? Get my TM2000 (Note: TM2000 also Includes TM2002 Exploded Views and Parts Guide) New Process NP205 Transfer Case Service Manual. A Complete NP205 shop Manual with over 375 color photographs is your indispensable NP205 resource for Repair Procedures and Parts Identification. Complete coverage of Disassembly, Inspection, and Reassembly Procedures. Also, Shop Notes, Tool Recommendations, Complete Parts Guide, and full color Exploded Views, including Right Drop and Left Drop Models, plus GM Specific Parts. Covers New Process NP205 Transfer Cases found in Chevrolet, Dodge, Ford, GMC, and International Harvester (IHC) 4x vehicles from 1969-1993!
Or my TM2002 for the Exploded Views and Parts Guide only. Fully Illustrated with dozens of crisp color photographs for EASY Parts Identification! This Manual includes a 10 page Parts Identification Guide with full color Exploded Views!