QU50543 Ford NP205 Output Seal

photo

QU50543 1-7/8" ID Output Seal for Ford NP205 Transfer Cases fits either the front or rear output of NP205 transfer cases in Ford trucks that have 1-7/8" output yoke hub diameters. Mostly used on Fords with QU50619 1310 series or QU40399 1330 series CV output yokes. Ford used as a single seal, but there is enough width in the bearing retainer to install 2 of these seals for maximum oil retention.

QU50543
Ford NP205 Output Oil Seal
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

Lubricate the Seal Lip with clean grease or petroleum jelly before installing the yoke to provide initial lubrication.

tech note

The Ford NP205 seal retainers are deep enough for two seals. I like to run two of these seals for each yoke to minimize the chances of an oil leak.

tech note

Ford used output yokes with both 1-7/8" and 2-1/8" ground hub diameters. Verify what size seal you need BEFORE you place your order. The outside diameter is the same for both seal types. If you need 2-1/8" ID Seals, see TK50123 and TK50092.