QU50601 Dana 60, Dana 70 King Pin Cup

photo

QU50601 Timken® King Pin Bearing Cup for Dana 44HD, Dana 60 and Dana 70 Front Axles This is a First Class, original equipment quality Bearing that meets or exceeds all vehicle manufacturer specifications making it the top choice for 1953 to 1993 heavy-duty front axle steering knuckle applications like yours equipped with Dana Spicer Model 44HD, Model 60, Model 61, or Model 70 closed knuckle or open knuckle front axles. Country of origin may vary as Timken® produces Bearings in plants located around the globe, however, QU50601 is almost always made in either Canada or the United States.

QU50601
Timken® King Pin or Knuckle Bearing Cup
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

Always replace the cup and cone at the same time.

tech note

The matching bearing cone for Dana Model 44HD (closed) 60, 61, and 70 closed or open knuckle front axle lower king pins and for Ford upper closed knuckle applications is QU50600. Dodge, GM, International, and Jeep used QU40327 Bronze Bushing for the upper king pins on closed knuckle Dana Model 60 and Model 70 front axles.

tech note

Need the Installer Plate to seat this bearing cup in your housing? Order QT1813 Bearing Cup Installer separately.

tech note

Also see Kits QU40191, QK4512 (open knuckle), QK4616 and QK4618 (closed knuckle) and QU50600 Bearing (all applications).

Application

APPLICATIONS:

Chevrolet/GMC:
Closed Knuckle Dana 44HD

(uses QA4936 12 Bolt Knuckle Ball Seal)
1963-1968 K20/K25
Open Knuckle Dana 60:
(Lower only, upper uses QU40093 Bushing)
1977-1987 K30, K3500
1988-1991 K3500/V3500 1 Ton (square cab models)

Dodge:
Closed Knuckle Dana 44HD

(uses QA4936 12 Bolt Knuckle Ball Seal)
1963-1971 W200
Closed Knuckle Dana 70
(uses QA4936 12 Bolt Knuckle Ball Seal)
1958-1974 W300, 1974-1978 W600
Open Knuckle Dana 60, 61:
(Lower only, upper uses QU40093 Bushing)
1975-1993 W-350 1 Ton*
1989-1993 W-250 all with Cummins Diesel
*For some reason, a few mid 1980's W-350 single rear wheel trucks have a wimpy Model 44 axle!

Ford:
Closed Knuckle Dana 44HD
:
(uses QA4936 12 Bolt Knuckle Ball Seal)
1961-1975 F-250 with Heavy-Duty Model 44 Front Axle
Closed Knuckle Dana 60:
(uses QA4936 12 Bolt Knuckle Ball Seal)
1974-1975 F-250 Crew Cab
Open Knuckle Dana 60:
(Lower only, upper uses QU40093 Bushing)
1978-1979 Heavy-Duty F-250, F-350
1985-1/2 to 1991 F-350

International:
Closed Knuckle Dana 44HD:
(uses QA4936 12 Bolt Knuckle Ball Seal)
1953-1975 200, 1200 with Heavy-Duty Model 44 Front Axle
Open Knuckle Dana 60:
(Lower only, upper uses QU40093 Bushing)
1975 1300 Camper Special
Closed Knuckle Dana 70
(uses QA4936 12 Bolt Knuckle Ball Seal)
1961-1975 300, 1300 1961-1982 1600

Jeep:
Closed Knuckle Dana 60:

(uses QA4936 12 Bolt Knuckle Ball Seal)
1967-1969 M715, M725, M726 Military 1-1/4 ton