TK10503 New Process Transfer Case Rear Bearing Retainer 5 Bolt Gasket for all Chevy, Dodge, Ford, GMC, IHC, and Jeep 4x4s with NP200, NP201, or NP205 transfer cases. TK10503 fits between the cast iron rear output housing and the 5 bolt rear output bearing retainer. Has cutout for oil feed passage found on many of these transfer cases. Original Equipment Spec Gasket made to precise dimensions for proper clearances. Made in U.S.A. Also available below is QU50454 aftermarket gasket for those cash challenged jobs.
QU50454 Aftermarket Transfer Case Rear Bearing Retainer 5 Bolt Gasket is a typical aftermarket gasket that does not meet original equipment specs for die cut dimensions, thickness or paper quality, however, for the low budget repair, it is far better to use one of these instead of assembling your case without gaskets!
The New Process NP200, NP201, and NP205 series of cast iron, gear drive transfer cases were all designed to be used with cut paper gaskets of precise dimensions. For proper clearances, always use original equipment thickness gaskets when working on you transfer case.
TK10503 is a high quality gasket, it does not need to be gooped up with sealant to make a leak-proof seal. If you wish to fill a gouge or use a sealant to hold the gasket in place during assembly, only apply a very thin film!
Matching Parts for NP200 and NP201 Transfer Cases:
QU50705 Rear Output Shaft, Inner Bearing Cup
TK50347 Rear Output Shaft Outer Bearing Cone
TK50346 Rear Output Shaft Outer Bearing Cup
TKA2053 Output Shaft Shim Kit
TK2110 Premium NP200 Bearing and Seal Kit
QU50515 NP201 Bearing and Seal Kit
TK2048 Premium NP201 Bearing and Seal Kit
TK2112 NP200 Gasket Kit
TK10604 8 Bolt Rear Housing Gasket
TK50123 Output Seal
QK2036 Output Shaft Nut and Washer Set