TKA2053 NP205 Idler Gear Shim Kit

photo

TKA2053 9 Piece NP205 Idler Gear Shim Kit contains an assortment of shims from 0.004" to 0.040" for precise adjustment of your New Process NP205, NP200, or NP201 gear drive Transfer Case Idler Gear end-play. Also used on NP200 and NP201 rear output shafts. Precision stamped and de-burred shims have the correct ID/OD to clear the idler shaft and idler bearing cage. Made in U.S.A.

Also See Individual Shim Page

TKA2053
Idler Gear Shim Kit for New Process Transfer Cases
Yes
* Kits made up of multiple items may not show an inventory in-stock status but are almost always in stock!

tech note

Set NP201 and NP205 Idler Gear End-Play from 0.000" to 0.002". Most Factory Shop Manuals specify an NP200 Idler Gear End-Play of 0.000" with no bearing preload.

The factory specification for Rear Output Shaft Bearing Preload on NP200 and NP201 Transfer Cases is 15 to 30 INCH-pounds.

tech note

TKA2053 Shim Kit has enough shims to precisely adjust the bearing end-play on one shaft. You should never need ALL the shims in a kit to adjust a single shaft, however, the remaining shims are usually not enough to adjust two shafts.

NP200 Transfer Cases have 3 components that require bearing adjustment; The upper Rear Output Shaft (Park Brake Shaft), The Lower Rear Output Shaft (for rear axle drive), and Idler Gear. For the NP200 I recommend you get 3 Shim Kits.

NP201 Transfer Cases have components that require bearing adjustment; The Rear Output Shaft  and Idler Gear. For the NP200 I recommend you get 2 Shim Kits.

NP205 Transfer Cases only require shims for the Idler Gear. I recommend you order 1 Shim Kit for an NP205 Transfer Case.

 

tech note

TKA2053 Kit Includes:
2 QU10605 0.004" Shims
2 QU10606 0.005" Shims
2 QU10988 0.010" Shims
1 QU10607 0.012" Shim
1 QU10608 0.015" Shim
1 QU10609 0.040" Shim

tech note

Some Dodge Shop Manuals refer to the New Process NP200 Transfer Cases as model 39360. An alternative model desgination for the Dodge NP201 is model 95060.

For International, The NP201 designation is Model T-140 or Code 13140.

Jeep Service Manuals call the NP200 the 200 Series.

tech note

Matching Parts and Tools for TKA2053 Shim Kit for NP200, NP201 Transfer Cases:
QU50680 Rear Output Shaft, Inner Bearing Cone (NP200 req 2, NP201 req 1)
TK50347 Rear Output Shaft Outer Bearing Cone (NP200 req 4, NP201 req 3)
TK50346 Rear Output Shaft Outer Bearing Cup (NP200 req 2, NP201 req 1)
QU50705 Timken Bearing Cup (NP200 req 2, NP201 req 1)
TK2110 Premium NP200 Bearing and Seal Kit
QU50515 NP201 Bearing and Seal Kit
TK2048 Premium NP201 Bearing and Seal Kit
TK2112 NP200 Gasket Kit
TK10503 5 Bolt Rear Output Gasket
TK10604 8 Bolt Rear Housing Gasket
TK50123 Output Seal
QK2036 Output Shaft Nut and Washer Set
QU20126 Idler Shaft Cover

tech note

Matching Parts and Tools for TKA2053 Idler Gear Shim Kit for NP205 Transfer Cases:
TK50347 Idler Gear Bearing (requires 2)
TK50346 Idler Gear Bearing Cup (requires 2)
QU20125 Idler Gear Spacer
QU20127 NP205 Idler Shaft
QU20126 Idler Shaft Cover
QT2013 Dummy Idler Shaft