TK4711/TK4780/TK4905 Torque King® Premium Front Wheel Bearing Kits for 1969.5-1994 Ford Dana 44 Front Axles fit 1969.5-1975 F250s with standard Dana 44 closed knuckle front axles and most 1969.5 to 1994 Ford Bronco, F-100 and F-150 4x4 trucks with Dana open knuckle beam type or IFS axles. Do the job right the first time with premium quality parts and installation tools custom made for the job!
TK4711 Master Kit with Tools includes 4 Timken® Bearings with Bearing Cups, 2 Wheel Seals, Bearing Cup Installers, Wheel Seal Installer and Driver Handle.
TK4780 Parts Only Kit includes the same great parts but no tools.
TK4905 Bearing Only Kit includes 4 Timken® Bearings with Bearing Cups.
These Kits fit 1969 Ford 4x4 F100 and Broncos above serial number F70000 (See Tech Note 4 for 1969 vehicles with Serial number F30001 to F70000). They also fits most 1970 and newer Bronco, F100 and F150 4x4s all the way to 1994. For the F250, these three Kits fit 1969 trucks after serial number F70000 and 1970 to 1975 light duty F-250s with the 3300 pound standard Dana 44 closed knuckle front axle. These standard F250 axles have internally splined wheel hubs and use QU40188 8 bolt knuckle seal. For 1959 to 1969 standard-duty Fords up to F70000, see Kits TK4911F/TK4912F.
Ford made a front seal/hub design change midway through the 1969 model year. The 1969.5 hub uses 3.3" diameter QU90001 Seal instead of 3.25" diameter QU50654 Seal. My 1964-1972 Ford Parts Book has the 1969 seal part number break point listed differently in the hub (to serial number F70000) and axle parts (to serial number F30000) sections. I believe the hub section is correct, but if your 1969 4x4 has a VIN between F30000 and F70001, you should physically verify which seal you need. The Break point is determined by the 1969 Vehicle Identification Number (VIN).
Use TK4911F/TK4912F Kits on F-Series and Bronco up to VIN F30000
VIN 30001 to F70000: Physically Identify Seal outside diameter before ordering
Use TK4711/TK4780 Kits on F-Series and Bronco from VIN F70001
TK4711/TK4780/TK4905 Kits fit several Ford axle configurations. 1969-1970 Ford U100 Broncos have Dana 30 open knuckle front axles. 1971 Broncos can have either Dana 30 and Dana 44 front axles. The F100/F150 pickups all had open knuckle beam type Dana 44 axles from 1969 through 1979. 1972 to 1979 Broncos also have Dana 44 open knuckle beam type axles. 1980 to 1994 Broncos/F100/F150 4x4s all have Dana 44 IFS front axles. Our three Kits fit all these vehicles EXCEPT 1987 to 1989 vehicles with "pancake" type wheel hubs.
Matching Parts and Tools for TK4711/TK4780/TK4905 Front Wheel Bearing Kits:
QK4727 3 Piece Round, 4 Slot Spindle Nut Kit with Round Lockwasher
QK4770 3 Piece Round, 4 Slot Spindle Nut Kit with Tanged Lockwasher
QU40106 Ratchet Type Spindle Nut (1985-1992)
QU40192 Spindle for 1976-1979 F100, F150, 1978-1979 Bronco
QU40309 Spindle for 1980-1992
QU20392U Used Splined Drum Brake Wheel Hub for 1969.5-1975
QU20348 Splined Disc Brake Wheel Hub Kit for 1980-1992 Ford Bronco and F150
QU20349 Splined Disc Brake Wheel Hub for 1993-1994
QU40045 Cap O-Ring for 1968-1979 Factory Spicer Hub
QU40044 Dial O-Ring for 1968-1975 Factory Spicer Hub
QT1012 4 Lug Spindle Nut Socket for 1985-1992 Ratchet Spindle Nut
QT1025 4 Lug Spindle Nut Socket for 1969-1992 with Double Spindle Nut
QU90018 Protection Plus Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing Grease
QT5500 Wheel Bearing Packer
1969.5-1986 F100, F150
1969.5-1975 F250 with 3300 pound Dana 44 Closed Knuckle Front Axle
1987, 1988 Bronco, F150 with Internally Splined Wheel Hub
1989-1994 Bronco and F150