TK50092 NP205 Transfer Case Rear Output Seal for all Dodge, Jeep NP200, Dodge, IHC NP201, and Chevy, Dodge, Ford, GMC, IHC NP205 transfer cases with the standard 2.125" diameter output yoke. TK50092 also fits all remote mount 205 transfer cases as an input seal or front output seal. Seal is thin enough that two can be installed for maximum oil retention. Made in U.S.A. or Mexico. Sold individually.
Lubricate the Seal Lip with clean grease or petroleum jelly before installing the yoke to provide initial lubrication.
New Process NP205 and most NP200, NP201 seal retainers are deep enough for two seals. I like to run two of these Seals to minimize the chances of an oil leak.
Ford used output yokes with both 1-7/8" and 2-1/8" ground hub diameters. Verify what size seal you need BEFORE you place your order. The outside diameter is the same for both seal types. If you need 1-7/8" ID Seals, see QU50543.
Matching parts for TK50092 Seal are:
QU40746 32 Spline 1310 Series Yoke for NP203, NP205
QU40710 32 Spline 1350 Series Yoke for NP203, NP205
QU40711 32 Spline 1410 Series Yoke for NP203, NP205
QU50509 32 Spline 7260 Series Yoke for Dodge NP203, NP205
QU40900 10 Spline 1410 Series Yoke for NP200, NP201
QU50429 Standard, 2-1/8" ID Current Production Original Equipment Seal
TK50123 Premium, 2-1/8" ID Double Lip, Double Wall Seal
QK2036 Output Yoke Nut and Washer Set
TK10503 5 Bolt Gasket for Rear Output Bearing Flange
TK10514 4 Bolt Gasket for Front Output or Remote Input Bearing Flanges
Chevy and GMC:
1969-1991 NP205 Rear Output Shaft
NP200, NP201 Military and Civilian Input Shaft, Rear Output Shaft, Front Output Shaft
1969-1974 W100, W200, W300 NP205 Input Shaft, Rear Output Shaft, Front Output Shaft
1980-1993 W350 NP205 Rear Output Shaft
1989-1993 W250 with Cummins Diesel NP205 Rear Output Shaft