Parts for 1959-1971 Dana-Spicer Model 60 Rear Axles in Dodge Trucks
The Dana 60 Rear Axle was used by Dodge on a number of 1/2 ton, 3/4 ton and 1 ton civilian trucks and vans from 1959-1971. While we have most of the common parts, we usually will not have any of the major components available. Page is under construction, more parts will be added soon!
Axle Identification
     
     
     
     
     
     
     
Check Out Now
Axle Assemblies and Axle Housings
     
     
     
     
     
     
     
Check Out Now
Axle Shafts
     
     
     
     
     
     
     
Check Out Now
Brake Parts
     
     
     
     
     
     
     
Check Out Now
Differential and Pinion Bearings, Individual
Over the years, Dana has primarily used Timken bearings when building their axles. For long life and dimensional consistency, Timken bearings are unmatched by any other brand of bearing I have used rebuilding axles over the past 30+ years in the business. When you are a shade tree mechanic dealing with a diff and pinion rebearing job without all the fancy gauging tools we have, you always want your new bearings to be the same overall thickness as the original bearings were when the axle was built so your pinion depth, pinion preload and backlash are within the tolerance limits when you are done with the job. Timken bearings will almost always deliver that type of accuracy, plus the steel quality and surface finish is the world's best.


Link to Vehicle Make or Category Links

QU50397 Differential Bearing Cup for Dana Model 60

Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks.

Please refer to QU50397 page for more details and ordering information.


QU50398 Differential Bearing for Dana Model 60

Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks.

Please refer to QU50398 page for more details and ordering information.

QU50400 Outer Pinion Bearing Cup for Dana Model 60

Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks.

Please refer to QU50400 page for more details and ordering information.


QU50401 Outer Pinion Bearing for Dana Model 60

Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks.

Please refer to QU50401 page for more details and ordering information.


QU50406 Inner Pinion Bearing Cup for Dana Model 60

Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks.

Please refer to QU50406 page for more details and ordering information.


QU50407 Inner Pinion Bearing for Dana Model 60

Rear Axles in 1961-1971 Dodge D-200 4x2 and W-200 4x4 3/4 ton trucks.

Please refer to QU50407 page for more details and ordering information.

Check Out Now
Differential and Pinion Bearing Kits
     
     
     
     
     
     
     
Check Out Now
Differential Parts
Differential problems with Dana 60 rear axles are not all that common. But Murphy, of Murphy's Law* really likes busted differentials, so when you hear that loud, heart-stopping, ominous BANG from the rear axle as your truck lurches to a grinding stop, you just KNOW it is one big dose of bad news. To help get you back on the road after you get rescued, we stock genuine original equipment Dana-Spicer Front Axle Differential Parts for your hard working Dodge truck.
*Murphy's Law: "Anything that can go wrong, will go wrong"
Link to Vehicle Make or Category Links
QU40518 Differential Pinion Mate Thrust Washer for Open Differentials Two of these Thrust Washers are used in each differential, one between each pinion mate gear and the differential case.

Please refer to QU40518 page for more details and ordering information.

QU40041 Differential Side Gear Thrust Washer for Open Differentials Two of these Thrust Washers are used in each differential, one between each side gear and the differential case.

Please refer to QU40041 page for more details and ordering information.
QU40520 Differential Cross Shaft for Open Differentials.

Please refer to QU40520 page for more details and ordering information.
QU40519 Lock Pin for Differential Cross Shaft for Open Differentials is used to lock QU40520 differential cross shaft to the diff case.

Please refer to QU40519 page for more details and ordering information.
     
     
Check Out Now
Gaskets
     
QU40078 Dana 60 8 Bolt Steel Rear Axle Shaft Flange Gasket is a genuine original equipment Dana-Spicer embossed steel gasket that fits 1960's Dodge Dodge Dana 60 rear axle applications that do NOT use an outer wheel seal sandwiched between two gaskets.  
     
     
     
     
     
Check Out Now
Manuals
     
     
     
     
     
     
     
Check Out Now
Miscellaneous
     
     
     
     
     
     
     
Check Out Now
Pinion Yokes and Pinion Seals
     
     
     
     
     
     
     
Check Out Now
Ring and Pinion Kits
     
     
     
     
     
     
     
Check Out Now
Small Parts
     
     
     
     
     
     
     
Check Out Now
Spindle Nuts and Spindle Nut Hardware
     
  QU40027 Rear Dana 60 Bend Over Tab Spindle Nut Lockwasher for 1959 to 1968 100 and 200 series Dodge trucks with Dana 60 full float rear axles having 1-13/16" diameter spindle threads.   
  QU40026 Rear Dana 60 2-3/8" Hex Spindle Nut for 1959 to 1968 100 and 200 series Dodge trucks with Dana 60 full float rear axles having 1-13/16" diameter spindle threads.   
     
     
     
     
Check Out Now
Tools
     
     
     
     
     
     
     
Check Out Now
Wheel Bearing and Seals, Individual
     
     
     
     
     
     
     
Check Out Now
Wheel Bearing and Seal Kits
     
     
     
     
     
     
     
Check Out Now