Dana 80 Rear Axle Parts for 1994-2002 Dodge Ram 2500 and Ram 3500 Trucks

We stock an excellent selection of parts for Dana 80 Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks. Dodge used Dana 80 Rear Axles in Ram 2500 models equipped with Cummins Diesel or gas V10 engines and manual transmissions. The Dana 80 was also used on ALL Ram 3500 trucks regardless of engine or transmission.

Although the basic design of these Dana axles has been well proven over many decades, you should remember that until the late 1980's, very few work vehicles ever saw the far side of 150,000 miles ..... (Continued below)

Axle Identification
Dana Axle ID Tag
Click to enlarge
All 1994-2002 Dana 80 Rear Axles in Dodge Ram trucks have a Bill of Material Number (BOM) stamped on a Build Tag (red arrow) attached to the differential by two of the differential cover bolts (yellow arrows). The BOM number is a 6 digit number beginning with a 6 plus a dash number (ex: 605523-3). They can be used to determine not only the axle model, but also what components the axle was originally built with. We often ask for this number to insure we provide you with the exact parts you need for your truck.
Each different BOM number signifies an engineering part change which may be minor or major and may involve one or more parts. The dash number indicates the axle ratio and differential type (open or locking). Unfortunately, these tags are often missing on trucks that had prior differential service.
Link to Our Dodge Web Page Index
cast axle numberClick to enlarge Many Dana Axle have the model number cast somewhere on the cast iron differential housing. (Number is shown at near actual size.)  

Model 80 Bill of Material Numbers
Dana 80 rear axles are found all Ram 2500 trucks with the V10 or Cummins Diesel and manual transmission. All Ram 3500 series trucks also used the Dana 80 regardless of engine.

1994-1995: 605592, 605593, 605594, 605595,605596, 605718
1996: 605718, 605788, 605789, 605780, 605791, 605792
1997: 605718, 605902, 605903, 605904, 605905, 605906, 605975, 605976, 605977, 606056
1998: 605982, 605983, 605984, 605985, 606064,
1999: 606150, 606151, 606152, 606153, 606154
2000: 606111,606112, 606113, 606114, 606115, 606243, 606244, 606245, 606246, 606247, 606545, 606546, 606547, 606548, 606549
2001-2002: 606268, 606269, 606270, 606271, 606272, 606709, 606710, 606711, 606712, 606713
 
Axle Assemblies and Housings
No Axle Assemblies or Housings Available at This Time Link to Our Dodge Web Page Index
     
     
     
Axle Shafts and Axle Shaft Flange Bolts
There are three axle shaft shaft choices for 1994-2002 Dodge Dana 80 Rear Axles depending upon the overall width of the rear axle. Left and right axle shafts are the same length for a given axle. All single rear wheel Ram 2500 and Ram 3500 trucks use the same length axle shafts regardless of year. To order a axle for a dual rear wheel , you need to know if it is a narrow track axle (cab and chassis truck) or a wide track axle (dually pickup chassis). Link to Our Dodge Web Page Index
   
DANA 80 35 SPLINE REAR AXLE SHAFTS are genuine Dana-Spicer parts for 1994 to 2002 Dodge Ram 2500 and Ram 3500 trucks with Dana-Spicer Model 80 Rear Axles. All Ram 2500 with the Cummins Diesel Engine and manual transmissions have a Dana 80 as do all Ram 3500 models with any transmission and engine combination.

QU40306 Dodge Dana 80 Rear Axle Shaft Flange to Rear Wheel Hub Bolt for securing your full float Dana axle shafts to the wheel hub. Genuine Dana-Spicer 7/16" flange-head Bolts feature a high-strength Grade 9 rating and factory applied threadlocking compound. Fits all Dana 80 full floating rear axles in 1994-2002 Dodge Ram 2500 and Ram 3500 Trucks.

Brakes
All 1994-2002 Dodge Ram 2500 and Ram 3500 trucks are equipped with Anti-Lock Brakes (ABS). Rear Drum Brakes with cable controlled parking brakes were used on all models until mid model year 2001 when rear disc service brakes/drum parking brakes were introduced. 13" x 2-1/2" rear drum brakes equipped 1994-1999 Ram 2500 trucks. 1994-1999 Ram 3500 Brake Size is 13" x 3-1/2". For 2000 and 2001, models, the drum brake size is 12-1/8" x 3-1/2".
Axle Vent/Brake Block Bolts are hollow, so it is very easy to twist them off due to rust or over-tightening.
Link to Our Dodge Web Page Index
QU40294 ABS Tone Ring for Dana 80 Rear Axles in Ford and Dodge Trucks is a genuine original equipment toothed ring that is an interference fit on your Dana 80 differential case.
QU11115 1994-1999 Brake Block Bolt/Axle Vent Fitting is a genuine original equipment hollow bolt that is used to attach the rear brake junction block to the axle housing and it acts as the axle vent outlet to which you attach the axle vent hose to your 1994 to 1999 Dodge Ram 2500 or Ram 3500 Dana 80 rear axle.
QU11116 2000-2002 Brake Block Bolt/Axle Vent Fitting is a genuine original equipment hollow bolt that is used to attach the rear brake junction block to the axle housing and it acts as the axle vent outlet to which you attach the axle vent hose to your 2000 to 2002 Dodge Ram 2500 or Ram 3500 Dana 80 rear axle.
     
Individual Timken® Differential and Pinion Bearings
If you only need a bearing or two for your 1994-2002 Dodge Dana rear axle, we stock the best: Timken®. For the amount of work it takes to change most axle bearings, the extra cost for a Timken® diff or pinion bearing is a small price to pay for better steel, more uniform surface finish, and accurate, precision ground races. Link to Our Dodge Web Page Index
QU50402 Timken® Dana 80 Differential Bearing Cup for Dana 80 Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
QU50403 Timken® Dana 80 Differential Bearing for Dana 80 Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
bearing cup QU50404 Timken® Dana 80 Outer Pinion Bearing Cup for Dana 80 Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
bearing QU50405 Timken® Dana 80 Outer Pinion Bearing for Dana 80 Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
QU50409 Timken® Dana 80 Inner Pinion Bearing Cup for Dana 80 Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
QU50410 Timken® Dana 80 Inner Pinion Bearing for Dana 80 Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
     
Differential Bearing and Seal Kits Featuring Timken® Bearings
With durable, torque rich Diesel and high powered gas fuel injected engines, vehicle mileage life expectancy is two to three times as great as it was with carbureted engines so an axle rebearing job is now a preventive maintenance service that should usually be performed on trucks with 150,000 (Cummins Diesel, V10) to 200,000 (gas V8) miles on the odometer to prevent catastrophic bearing related failures. Our Differential Bearing and Seal Kits include Timken® Differential and Pinion Bearings plus a pinion seal and small parts needed to perform the typical Dana 80 full float Dodge rear axle rebearing service. Link to Our Dodge Web Page Index
TK4659 1994-1999 Torque King® Premium Master Dana 80 Differential Bearing and Seal Kit for 1994-2002 Dodge Ram includes Timken® Bearings and genuine Dana Small Parts includes Differential and Pinion Bearings, Pinion Seal, Pinion Nut, Pinion Washer, Outer Pinion Slinger, Pinion Depth Shims, Differential Shims, Pinion Preload Shims, 2 Axle Shaft Flange Gaskets, Threadlocker, and RTV Sealant.
TK4778 2000-2002 Torque King® Premium Master Dana 80 Differential Bearing and Seal Kit for 1994-2002 Dodge Ram includes Timken® Bearings and genuine Dana Small Parts includes Differential and Pinion Bearings, Pinion Seal, Pinion Nut, Pinion Washer, Outer Pinion Slinger, Pinion Depth Shims, Differential Shims, Pinion Preload Shims, 2 Axle Shaft Flange Gaskets, Threadlocker, and RTV Sealant.
QU50437 Standard Differential Bearing and Seal Kit for Dodge Dana 80 Rear Axles fits Dana 80 Full Float Rear Axles. QU50437 features first class Timken® Differential and Pinion Bearings. Kit also includes aftermarket Pinion Seal, Pinion Nut, Gear Marking Compound, Threadlocker, and RTV Sealant.
Differentials and Parts: Factory Limited Slip Differentials
During the 1994 to 2002 model years, Dodge Ram 2500 and 3500 trucks using Dana-Spicer rear axles were available with an optional Dana clutch-type Limited Slip differential. Both the Powr-Lok™ and Trac-Lok™ were used in the Dana 80. Powr-Lok™ differentials were an option for 1994 to 1998 model years. Production of Model 80 Powr-Lok™ units and internal gears ceased in 1998. If a Model 80 Powr-Lok™ needs more than clutches, it has to be replaced by a Trac-Lok™ or other differential assembly. Starting in 1999, you could order your new Dodge Dana 80 with a Trac-Lok™ differential. Externally, Model 80 Powr-Lok™ and Trac-Lok™ cases look similar as both are of a two-piece design, however, they are easily identified by the shape of the cross-shaft pin ends. The Powr-Lok™ pins are oval with one side angled. Trac-Lok™ pin ends are round. Link to Our Dodge Web Page Index
QK4608 1994-1998 Dana 80 Powr-Lok™ Clutch Replacement Kit for 1994-1998 Dodge Ram 2500, Ram 3500 with factory Limited Slip Dana 80 Rear Axles. Each kit includes complete Clutch Packs, 8oz. of Limited Slip Additive, axle shaft Flange Gaskets, Threadlocker, and RTV sealant. Made in U.S.A.

QK4607 1999-2002 Dana 80 Trac-Lok™ Clutch Replacement Kit for 1999-2002 Dodge Ram 2500, Ram 3500 with factory Limited Slip Dana 80 Rear Axles. Is your 1999-2002 Dodge chattering or slipping? Chances are the original clutch packs are worn out. Rebuild your factory limited-slip differential with genuine Dana-Spicer replacement parts. Each kit includes complete Clutch Packs, 8oz. of Limited Slip Additive, axle shaft Flange Gaskets, Threadlocker, & RTV sealant. Made in U.S.A.
QU40430 1999-2002 Dana 80 Trac-Lok™ Dana Inner Differential Parts Overhaul Kit for your 1999-2002 Ram 2500 or Ram 3500 with the factory Dana 80 Trac-Lok™ Differential Includes complete set of clutch discs, cross, 4 pinion mate gears, 4 pinion mate thrust washers, 2 side gears, and 2 disc washers. This Kit has the parts you need to restore the limited slip to your Trac-Lok™ differential!
QU40218 4 Ounce Limited Slip Lube is supplied by Dana-Spicer for all Powr-Lok and Trac-Lok™ limited-slip differentials in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks with Dana 80 Rear Axles. For a professional job, we recommend one 4 ounce bottle of lube to soak your clutches and one 4 ounce bottle to add to your rear differential oil after any drain and refill of axle lubricant.

Link to our Large Individual QU40218 Page
Differential Parts: Factory Open Differentials
The 35 spline Dodge Dana 80 Open Differential is more than adequate for stock or near stock engine horsepower. As power increases, the chances of gear breakage increase substantially. If you are planning an axle ratio change, you need to keep in mind the ring gear offsets are different for 3.73 and numerically lower ratios and 4.10 and numerically higher ratios. So if you are changing from a 3.54 to 4.10 or vice-versa, you MUST change the diff case! The internal parts are the same, but the ring gear flange on the diff case (carrier) is closer to the pinion on the 4.10-up cases. Link to Our Dodge Web Page Index
QU40295 Dana 80 Differential Internal Parts Kit genuine Dana Internal Diff Gear Set for Dana 80 open differential Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
QU40491 Bare 3.54 Ratio Dana 80 Bare Differential Case is a genuine Dana Diff Case Kit for 3.54 ratio Dana 80 open differential Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
QU40484 Loaded 3.54 Ratio Dana 80 Differential Case Assembly with Differential Bearings is a genuine Dana original equipment case assembly for 3.54 ratio Dana 80 open differential Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
QU40490 Bare 4.10 Ratio Dana 80 Differential Case is a genuine Dana Diff Case Kit for 4.10 ratio Dana 80 open differential Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
QU40117 Differential Cross Shaft Retaining Pin is a genuine Dana original equipment part for Dana 80 open differential Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks.
     
     
Gaskets and Gasket Maker
Dana 80 Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 Trucks did not use differential cover gaskets. The Diff Cover is sealed with RTV sealant. The only gaskets used are steel gaskets between the wheel hub and axle shaft flange. Link to Our Dodge Web Page Index
QU40078 Rear Axle Shaft Flange to Wheel Hub Gasket To prevent oil leaks, your Axle Shaft Flange Gaskets should be replaced anytime the axle is removed. These embossed steel gaskets are genuine Dana-Spicer parts. Fits all 1994 to 2002 Dodge Ram 2500 and Ram 3500 with Dana 80 Full Floating Rear Axles.

S82194 Ultra Gray RTV Sealant combines high adhesion and resistance to both conventional and synthetic gear lubes. The perfect choice to seal the differential cover on your Dodge Ram Dana 80 Rear Axle.
Manuals and Technical Information
Knowing how to do the job right the first time is half the battle. With our detailed, easy to read, and well illustrated technical publications, you get accurate service procedures, torque specifications, and tool recommendations. Link to Our Dodge Web Page Index
TM4400 Pinion and Differential Bearing Service On Dana-Spicer Monobeam Axles. covers step by step in text and photos the differential service procedures, specifications, and tools needed to replace differential and pinion bearings in Dana Spicer front or rear drive axles.
TSB4008 1994-2002 Dodge Rear Wheel Bearing Adjustment Covers adjustment procedures and Torque Specs for 1994-2002 Dodge 2500 (3/4 Ton) and 3500 (1 Ton) Trucks and Vans with Dana 60, 70 or 80 full-float rear drive axles.
Miscellaneous
Proper lubrication and replacing damaged or worn small parts is often the difference between a first class, long-term repair and a short lived nightmare. In this section are the small parts, chemicals, and accessory items that do not neatly fit under our other parts headings. Link to Our Dodge Web Page Index
S24200 Blue Threadlocker for spindle and ring gear bolts etc.
QU90008 Gear Marking Compound use with QT9404 Brush to check your ring and pinion gear tooth pattern.
S9975 Anti-Seize Lubricant use between the spindle and knuckle mating surfaces to prevent rust bonding.
QU90018 Pyroplex® Protection ES Synthetic Grease provides extended service protection for king pin, axle universal joint, and wheel bearing applications under the harshest on and off road conditions!
QU90015 Syncon High Performance Synthetic Arctic Grease is an extreme pressure, premium quality, synthetic cold weather grease that provides exceptional protection for bearings and chassis components in sub-zero weather.
QU90016 SynPower® is a superior quality, moly-fortified, Synthetic Bearing/Chassis Grease for all U.S., European, and Japanese Vehicles.  Use on disc and drum brake wheel bearings, chassis, suspension, universal joints, and CV joints.
QU90017 Red Grease is a premium, extreme pressure, high performance wheel bearing grease with special additives providing excellent rust protection and high resistance to water washout. QU90017 is an high quality, non-synthetic grease suitable for all 4x4 and light truck disc and drum brake wheel bearing applications, plus it is an ideal grease for chassis lubrication. Available in 14 oz. cartridge or 1 pound tub.
QU40218 4 Ounce Limited Slip Lube is supplied by Dana-Spicer for all Powr-Lok and Trac-Lok™ limited-slip differentials in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks with Dana 80 Rear Axles. For a professional job, we recommend one 4 ounce bottle of lube to soak your clutches and one 4 ounce bottle to add to your rear differential oil after any drain and refill of axle lubricant.

Link to our Large Individual QU40218 Page
QU90009 Universal Axle Service Pack is the Bargain Priced Chemical Service Pack included in many of our QU series Differential Bearing Kits. You get Threadlocker for the ring gear bolts, diff cap bolts, and pinion nut, QU90008 Gear Marking Compound for checking the tooth pattern on your gear set, Blue RTV sealant for the diff cover and a small brush to apply the Gear Marking Compound.
Pinion Seals
Dodge used a total of four different Pinion Oil Seals for 1994-2002 Dana 80 full floating rear axles. In addition, QU40251 outer wiper seal was fitted in addition to the oil seal for 2000-2002 models.
1994-1997 QU40258 Seal with a standard double lip (Interchangeable with QU40302)
1998-1999 QU40302 Seal with hydrodynamic double lip (Interchangeable with (QU40258)
2000-2001 QU40335 Flat Face Seal, shallow shell with no flange (NOT interchangeable with any other Seal)
2001-2002 QU40248 Flat Face Seal, deep shell with flange (NOT interchangeable with any other Seal)
Link to Our Dodge Web Page Index
QU40258 1994-1997 Dodge Dana 80 Pinion Seal is a genuine original equipment replacement for mid-production Dodge Dana 80 rear axles. This is the exact original equipment part for 1994-1997 Dodge Ram 2500, Ram 3500 trucks with Dana 80 full floating rear axles
QU40302 1998-1999 Dodge Dana 80 Hydrodynamic Pinion Seal is a genuine original equipment replacement for mid-production Dodge Dana 80 rear axles. This is the exact original equipment part for 1998-1999 Dodge Ram 2500, Ram 3500 trucks with Dana 80 full floating rear axles
QU40335 Dana 80 Shallow Shell Pinion Seal for 2000-2001 Dodge Ram 2500 and Ram 3500 This seal fits early production housings with shallow seal bores. This seal can be identified in the vehicle by the absence of an external flange that seats against the front face of the axle housing.
QU40248 Dana 80 Flanged Pinion Seal for 2000-2002 Dodge Ram 2500 and Ram 3500 This seal fits late production housings with deep seal bores. This seal can be identified by an external flange that seats against the front face of the axle housing.
QU40251 2000-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axle Pinion Outer Wiper V-Seal is used on late production Dana Model 80 rear axles that use QU40248 or QU40335 Pinion Seals. The function of this seal is to protect the pinion seal from road splash and other object damage.
Pinion Yokes and Pinion Yoke Kits
Dodge used two different, non interchangeable Pinion Yokes for 1994-2002 Dana 80 Rear Axles. Both take the same size u-joint, but use different seals. We stock both individual Yokes and Yoke Kits with seals and hardware. Link to Our Dodge Web Page Index
QU40716 1994-1999 Pinion Yoke for Dodge Dana 80 Rear Axle is a genuine original equipment yoke with a factory installed protective Cone Shaped slinger.
QK4651 1994-1999 Dana 80 Rear Pinion Yoke Kit has all the genuine original equipment replacement parts you need to replace a worn or damaged pinion yoke.
QU10636 2000-2002 Pinion Yoke for Dodge Ram 2500, Ram 3500 Dana 80 Rear Axle is a genuine original equipment yoke with a factory installed protective Flat slinger.
QK4869 2000-2002 Dodge Dana 80 Rear Pinion Yoke Kit has all the genuine original equipment replacement parts you need to replace a worn or damaged pinion yoke.
QU40709 Universal Joint Strap and Bolt Kit for 1994-2002 Dodge Dana Model 80 Rear Axles
Ring and Pinion Kits
When it comes to fit, finish, durability, and ease of set-up, no aftermarket gear set equals the matched, original equipment Dana-Spicer Ring and Pinion Sets. I have been building axles for well over 30 years, and to date, I have never had a problem setting up a genuine Dana-Spicer gear set or have we had to set up a gear set warranty. That is a track record that the aftermarket gear suppliers can only dream about. The bottom line is when you purchase a genuine Dana-Spicer gear set, you get quality equal to original equipment because it Is original equipment. When you select an aftermarket import gear set you will not get a gear set that installs and performs equal to original equipment. Link to Our Dodge Web Page Index
QU40314 Dana 80 3.54 Ratio Ring and Pinion Kit for Dodge Ram is a genuine Dana-Spicer Ring and Pinion Kit for Dodge Ram 2500 and 3500 trucks that includes Matched Ring and Pinion Gear Set, Pinion Bearings, Shims, and Small Parts.

Link to QU40314 Large Text Individual Product Page.
QU40483 Dana 80 4.10 Ratio Ring and Pinion Kit for Dodge Ram is a genuine Dana-Spicer Ring and Pinion Kit for Dodge Ram 2500 and 3500 trucks that includes Matched Ring and Pinion Gear Set, Pinion Bearings, Shims, and Small Parts.

Link to QU40483 Large Text Individual Product Page.
Small Parts
Sometimes, you just need one or two small parts to get back on the road. Between the small parts listed in this section and many others listed under part specific headings elsewhere on the page, we probably have that pesky little part you have to have but just can't find anywhere else. Link to Our Dodge Web Page Index
QU40306 Dodge Dana 80 Rear Axle Shaft Flange to Rear Wheel Hub Bolt for securing your full float Dana axle shafts to the wheel hub. Genuine Dana-Spicer 7/16" flange-head Bolts feature a high-strength Grade 9 rating and factory applied threadlocking compound. Fits all Dana 80 full floating rear axles in 1994-2002 Dodge Ram 2500 and Ram 3500 Trucks.

QU40343 Dana 80 Differential Cap Bolt with 3/4" hex head for all Dana 80 Rear Drive Axles in 1994-2002 Dodge Ram 2500, Ram 3500 trucks. Long shoulder, hardened, Grade 8 bolt is a genuine Dana-Spicer original equipment part.
QU40096 Dana 80 Ring Gear Bolt is a genuine original equipment Ring Gear Bolt for 1994-2002 Dodge Ram 2500, Ram 3500 with Dana 80 drive axles.
QU40261 Dodge Dana 80 Differential and Pinion Shim Kit for Dana-Spicer Model 80 full float Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks. Genuine Dana-Spicer Shim Kit includes Pinion depth shims, pinion preload shims, differential adjusting shims, pinion nut, and pinion washer.
QU40213 Dodge Dana 80 Differential Shim Kit for Dana-Spicer Model 80 full float Rear Axles in 1994-2002 Dodge Ram 2500 and Ram 3500 trucks. Genuine Dana-Spicer Shim Kit includes a selection of differential adjusting shims.
QU40260 Dana 80 Outboard Differential Bearing Spacer Set includes two thick steel genuine Dana Spacers that fit between the differential bearing cups and axle housing on all 1994-2002 Dodge Ram 2500, Ram 3500 Dana 80 rear axles.
QU40095 Dana 80 Outer Pinion Oil Slinger fits between the outer Pinion Bearing and Pinion Yoke on 1994-2002 Dodge Ram 2500, Ram 3500 with Dana 80 drive axles.
QU40061 Dana 80 Pinion Nut
Spindle Nuts and Spindle Nut Kits
Spindle Nuts have two functions and they are to provide for correct wheel bearing adjustment and to keep your wheel hubs in place. We stock both the original equipment single nut and our Torque King® double spindle nut upgrade sets for your big Dodge Dana 80 rear axle. Stock Spindle Nuts and Spindle Lock Wedges are "Single Use" parts that are designed to be installed once and only once. For safety reasons, you must discard both the nut and wedge if they are removed from the spindle for any reason. Both parts lose a percentage of their resistance to coming off when they are removed. You may hear of cases where this type of factory nut has come off while the truck was being driven. Invariably, these failures involve nuts and wedges that have been reused or improperly installed. Link to Our Dodge Web Page Index
QU40118 Locking Spindle Nut for Dana 80 Rear Axles is a genuine original equipment, single use, replacement nut for all 1994 to 2002 Dodge Ram 2500 and 3500 trucks with Dana 80 rear axles. Use with QU40115 Lock Wedge.
Spindle Nut Lock Wedge QU40115 Spindle Nut Lock Wedge for spindle nut on Dana 80 rear axles is a genuine original equipment, single use, replacement lock wedge for all 1994 to 2002 Dodge Ram 2500 and 3500 trucks. Use to lock QU40118 Nut in place.
QK4008 and QK4009 Stock Spindle Nut Kits for 1994-2002 Dodge Ram 2500 and Ram 3500 trucks with Dana 80 full float rear axles. These two Kits feature those critical, genuine original equipment replacement parts needed any time wheel bearing service or wheel hub removal is needed on your big Dodge Ram with ether single or dual rear wheels.
TK4011/TK4012 Torque King® Spindle Nut Upgrade Kits offer precise adjustment, superior strength, & long life when replacing your original nonreusable spindle nut/lock wedge with our four piece combination that includes a reusable Inner Thrust Washer, 2 reusable Hex Spindle Nuts, and a nonreusable Bend Over Tab Lockwasher. These Kits fit all single or dual rear wheel 1994 to 2002 Dodge Ram 2500 and Ram 3500 series trucks.
TK4018 Torque King® Spare Parts Kit for 1994 to 2002 Dodge Ram 2500 and Ram 3500 series trucks equipped with our TK4011 or TK4012 Double Rear Spindle Nut Kits.
     
Tools
Having the right tool for the job makes the work easier and faster, plus the correct tool will usually minimize the chances of wrecking parts. We offer many special tools made specifically for the Dana 80 rear axle in your 1994-2002 Dodge. Link to Our Dodge Web Page Index
QT1004 Inner Pinion Bearing Installer for 1994-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axle.
QT1088 Press Step Plate used when Pressing Differential Bearings on or off.
QT1801 Outer Pinion Bearing Cup Installer and Outer Wheel Bearing Cup Installer (for both Single and Dual Rear Wheel) 1994-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axles.
QT1804 SRW Inner Wheel Bearing Cup Installer for Single Rear Wheel 1994-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axles.
QT1806 Inner Pinion Bearing Cup Installer and DRW Inner Wheel Bearing Cup Installer for 1994-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axles.
QT1100 Series Driver Handles are used in conjunction with our seal and bearing cup installers
QT1033 and QT1219 Differential Case Spreaders for Dana-Spicer Axles. Dana Axles are designed to have a differential bearing preload of .010"-.015". With our Case Spreaders, removing and installing front and rear differentials on your 4x4 is much easier and will help prevent damage to those expensive differential components. Simply insert the attachment pins into the holes in your differential casting, mount a dial indicator to measure the amount of spread, and turn the adjuster to spread your housing up to .020" depending upon axle model.
QT1009 Spindle Nut Socket for removing or installing stock rounded hex spindle nuts on 1994-2002 Dodge Ram D2500/W2500, Ram D3500/W3500 with Dana 80 Rear Axles.
QT1013 Spindle Nut Socket for removing or installing our Double Spindle Nuts in TK4012 Upgrade Kits on 1994-2002 Dodge Ram D2500/W2500, D3500/W3500 with Dana 80 Rear Axles.
QT1510 Type 1 SRW Wheel Seal Installer for installing QU40450 Single Rear Wheel Seal in 1994-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axles.
QT1503 Type 2 SRW Wheel Seal Installer for installing QU40449 Flanged Single Rear Wheel Seal in 1994-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axles.
QT1538 DRW Wheel Seal Installer for Dual Rear Wheel 1994-2002 Dodge Ram 2500, Ram 3500 Dana 80 Rear Axles.
QT9018 5 Pound Dead Blow Hammer is just about the first tool you will reach for for a multitude of jobs on your Dodge Ram. From seating differentials to removing rusted on wheels, the ability to apply persuasive force without damaging the reluctant part will make you wonder how you ever lived without this essential tool.
     
Wheel Bearings (Individual)
We stock original equipment quality Timken® Rear Wheel Bearings for your 1994 -2002 Dodge Ram 2500 or Ram 3500 truck with a Dana 80 full floating Rear Axle. The outer wheel bearing is the same for all models, but the inner wheel bearing is different for single rear wheel or dual rear wheel applications. Link to Our Dodge Web Page Index
QU50411 Timken® Outer Bearing Cup for both single and dual rear wheel 1994-2002 Dodge Ram 2500, Ram 3500 trucks with Dana 80 Rear Axles.
QU50412 Timken® Outer Bearing for both single and dual rear wheel 1994-2002 Dodge Ram 2500, Ram 3500 trucks with Dana 80 Rear Axles.
QU50413 SRW Timken® Inner Bearing Cup for Single Rear Wheel 1994-2002 Dodge Ram 2500, Ram 3500 trucks with Dana 80 Rear Axles.
QU50414 SRW Timken® Inner Wheel Bearing for Single Rear Wheel 1994-2002 Dodge Ram 2500, Ram 3500 trucks with Dana 80 Rear Axles.
QU50377 DRW Timken® Inner Wheel Bearing Cup for Dual Rear Wheel 1994-2002 Dodge Ram 3500 trucks with Dana 80 Rear Axles.
QU50376 DRW Timken® Inner Wheel Bearing for Dual Rear Wheel 1994-2002 Dodge Ram 3500 trucks with Dana 80 Rear Axles.
Wheel Seals (Individual)
We stock original equipment quality Wheel Seals and for your 1994 -2002 Dodge Ram 2500 or Ram 3500 truck with a Dana 80 full floating Rear Axle. The outer wheel bearing is the same for all models, but the wheel seal is different for single rear wheel and dual rear wheel applications. Single Rear Wheel axles were built with two types of interchangeable wheel seals during the 1996-1999 model years. Type 1 Seals were used throughout the 1994-2002 era. Type 2 Seals were only original equipment on some 1996-1999 axles. Link to Our Dodge Web Page Index
QU40450 Type 1 Single Rear Wheel Seal for 1994 to 2002 3/4 ton and 1 ton trucks with single rear wheels and Dana 80 rear axles (Ram 2500, Ram 3500). Conventional (no seating flange) original equipment Double lip seal features Wave seal inner lip to contain oil and protective outer wiper lip to exclude brake dust and other contaminants.
QU40449 Type 2 Flanged Single Rear Wheel Seal for 1996 to 1999 Ram 2500 3/4 ton and Ram 3500 1 ton trucks with single rear wheels and either Dana 70 or Dana 80 rear axles. Flanged seal was original equipment on some 1996-1999 trucks but will fit all 1994-2002 SRW hubs. Double lip seal features bidirectional hydrodynamic inner lip to contain oil.
QU40451 Original Equipment Dual Rear Wheel Seal for all 1994 to 2002 Dodge Ram 3500 1ton trucks with dual rear wheels all of which have Dana 80 rear axles (Fits both 4x2 and 4x4 trucks).
QU50075 Special Double Lip Dual Rear Wheel Seal features outer wiper lip to protect the inner lip from brake and road crud. Fits 1994 to 2002 1 ton trucks with dual rear wheel Dana 80 rear axles (1994-2002 Ram 3500).
Wheel Seal and Bearing Kits
The rear wheel bearings in 1994-2002 Dodge Dana 80 Rear axles average about 125,000 miles before requiring replacement. Torque King® Premium Rear Wheel Bearing and Seal Kits for your Dodge feature premium Timken® bearings and original equipment quality wheel seals because when it comes to rear wheel bearings and seals, only the best will do to safely support the heavy loads your truck hauls. To help you install these vital components properly, Torque King® Master Kits include bearing cup and wheel seal installers. Why use makeshift installation methods that can damage precision surfaces when affordable tools are available to do the job right the first time? Link to Our Dodge Web Page Index

TK8356/TK8360 Parts Only SRW Torque King® Premium Rear Wheel Bearing and Seal Kits for 1994 to 2002 Dodge Ram 2500 3/4 ton and Ram 3500 1 ton trucks with Single Rear Wheels. Kit includes Timken® Wheel Bearings, Original Equipment Wheel Quality Seals, Axle Shaft Flange Gaskets, and Threadlocker.
TK8308/TK8359 Master SRW Torque King® Premium Rear Wheel Bearing and Seal Kits with Tools for 1994 to 2002 Dodge Ram 2500 3/4 ton and Ram 3500 1 ton trucks with Single Rear Wheels. Kit includes Seal and Bearing Cup Installation Tools, Timken® Wheel Bearings, Original Equipment Quality Wheel Seals, Axle Shaft Flange Gaskets, and Threadlocker.
TK8324 Parts Only DRW Torque King® Premium Rear Wheel Bearing and Seal Kit for 1994 to 2002 Dodge Ram 3500 1 ton trucks with Dual Rear Wheels. Kit includes Timken® Wheel Bearings, Double Lip Wheel Seals, Axle Shaft Flange Gaskets, and Threadlocker.
TK8307 Master DRW Torque King® Premium Rear Wheel Bearing and Seal Kit for 1994 to 2002 Dodge Ram 3500 1 ton trucks with Dual Rear Wheels. Kit includes Seal and Bearing Cup Installation Tools, Timken® Wheel Bearings, Double Lip Wheel Seals, Axle Shaft Flange Gaskets, and Threadlocker.
Wheel Hubs
None in stock at this time  
     
     
     
     
(continued from top of page)....unless they were totally rebuilt. With the power and durability of Cummins Diesel and fuel injected gas engines and the severe loads they can impose on the drivetrain, you should plan on doing a complete re-bearing job on your 1984-2002 rear axle every 125,000-150,000 miles to prevent catastrophic failures. (See Tech Article Dana-Spicer Rear Drive Axle Component Failures)
A number of engineering changes were made by Dana over the 1994-2002 model years. Most of these occurred between 1999 and 2001. After producing axles for Dodge trucks since the 1950's, Dana lost the contract to produce rear drive axles for Dodge to American Axle Manufacturing (AAM was once the GM Axle Division) effective for the 2003 model year. (back to top)