7 PIECE BALL JOINT PRESS SET FOR 1994-1999 DODGE & 1980-CURRENT FORD DANA 50 & DANA 60 AXLES
Dan the Gear ManŽ Tech Note:
Before removing your old ball joints, you MUST clean out dirt and crud from the area between the ball joint and edge of the steering knuckle counterbore before placing the Ball Joint Receiver in position. The Receiver must be able to seat against the steering knuckle.
Failure to remove any packed in material will result in major tool damage!
|Dan the Gear ManŽ Tech Note:
Using any type of press can be dangerous due to the forces applied to both the tools and parts. Always wear eye protection. Most workplace safety has to do with having some mechanical experience and plain common sense. If you do not know how to safely work on your vehicle, have the work performed by a professional automotive technician!
TS4511 7 Piece Ball Joint Press Set for Dana Model 50 and 60 Axles Applications
: The safest and most efficient way to replace the Ball Joints on your Ford or Dodge heavy-duty 3/4 ton or 1 ton 4x4 truck. Change your Ball Joints the easy
and safe way!
The six, precision made, USA made press adapters are CNC machined from solid, domestic, high strength steel specifically to service the Ball Joints on your truck. This
Tool Set includes one each:
Adapter (Used when installing the Lower Ball Joint Nut)
Lower Ball Joint Receiver
Upper Ball Joint Receiver
Upper Ball Joint Installer
Press Sleeve (Used to install the Lower Ball Joint)
Adapters are machined to fit the dimensions of all stock, original equipment Ball Joints and any aftermarket Ball Joints made to the same or slightly oversize external dimensions as original
Adapters are Made in U.S.A. C-Frame Press imported from China.
Link to our TS4511 4x4tools.com Large Text Product Page
1994-1997 Ram 2500 V8 gas w/8,800 GVWR or higher rating.
1998-1999 All Ram 2500 with gas V8 engine
1994-1999 Ram 2500 all with V10 or Cummins Diesel engine
1994-1999 All Ram 3500 trucks
2000-up Dodge Ram 2500 and Ram 3500 4x4 trucks
2000-2002 Dodge Ram 3500 4x2 cab and chassis trucks with solid beam front axles
1980-1997 F-250 partial (Model 50 4600# IFS axle)
F-350 All (Model 50 4600# IFS axle)
1992-1997 F-350 ALL (Model 60 Axle)
1999-2004 F-250, F-350 Model 50 or 60 axle
1999-2004 F-450 and F-550 Model 60 Axle
2000-2005 Excursion Model 50 Axle
2005-current F-250, F350, Super 60 Axle