QK4816 Coarse Thread Front Unitized ABS Wheel Hub Kit for Dual Rear Wheel Super Duty 4x4 Trucks original equipment quality replacement Unitized Hub Assembly Kits for 1999 to 2004 F-350, F-450 and F-550 4x4 trucks with Dual Rear Wheels (DRW) built after March 22, 1999.

See Applications, Shopping Cart & Related Main Page Links Further Down This Page
Use Your Browser Back Arrow to Return to Previous Page

Dan the Gear Man® Tech Note 1:
The coarse thread wheel studs are 14 mm in diameter and have a 2.0 thread pitch. Be advised that the bolt-on cast iron hub adapters that fit between the wheel hub and front wheel on 2003 and 2004 trucks have 14mm x 1.5 thread Fine Thread studs on the wheel side. Why these trucks use coarse thread studs on the hub and fine thread studs on the adapter is something I do not know.

Dan the Gear Man® Tech Note 2:
Your Hub Extension which is the factory wheel adapter between the wheel hub and front wheel is NOT included in this Kit. You must remove it from your old hub and install it on the new hub.

Dan the Gear Man® Tech Note 3: The 4x4 Wheel Hub Assembly for your Ford is of unitized construction. It was not designed to be disassembled or serviced except for QU40143 Axle Shaft Support Bearing and QU20023 O-ring. Consequently, no wheel bearing service parts or tools are available. The same is true for the factory hub locks. Except for QU20044 O-ring and QU20043 Snap Ring, no service parts are available.

Dan the Gear Man® Tech Note 4:
The Wheel Hubs used on 1999.5-2004 DRW Ford Super Duty F-350, F-450, and F-550 4x4 trucks are the same. In my opinion, the basic design and size of these parts is adequate for the F350 models, but I do not believe the wheel bearings are really large enough for the heavy Gross vehicle Weight F-450 and F-550 models, especially those with snow plows or longer wheelbases that put a greater percentage of weight on the front axle compared to short wheel base trucks. I don't have a solution for this situation, as the potential, F-450 and F-550 hub durability issues are due to size and NOT component quality.

Dan the Gear Man® Tech Note 5:
Component Parts of QK4689 Hub Kit:
QU50263 Hub Assembly (Exploded View Item 8 in our Tech Publications for Ford Super Duty®)
4 QU20080 Hub-to-Knuckle Studs (Exploded View Item 9 in our Tech Publications for Ford Super Duty®)
4 QU20081 Hub-to-Knuckle Flanged Nuts (Exploded View Item 27 in our Tech Publications for Ford Super Duty®)
QU20023 Hub-to-Knuckle O-Ring (Exploded View Item 12 in our Tech Publications for Ford Super Duty®)
S9978 Threadlocker
S20356 Disc Brake Lube
S9975 Anti-Seize.

Dan the Gear Man® Tech Note 6:
Need Tech Help for changing your wheel hubs? See these 4x4 Tech Publications: TSB4594, TM4637, and TM4688 .

QK4816
One Coarse Thread Front Hub Kit for 99-04 DRW Super Duty
FORD FRONT WHEEL HUB APPLICATIONS:
F-350, F-450, F-550 with Dual Rear Wheel, 4 wheel ABS and coarse thread studs